Aerators

Our sizes: 0.35gpm, 0.5gpm and 1.0gpm flow rates

Super Low Flow .35 gpm Aerators and Earn LEED® Points!

Super low flow .35 gpm aerators deliver a flow rate 30% below the baseline for public access bathrooms and maximize LEED® points in green buildings. The pressure compensating design provides a constant flow from 20 to 80 psi.

Low Flow 0.5 GPM Faucet Aerators for Bathrooms

Our low flow .5 gpm faucet aerators are well suited for bathrooms, washing hands and brushing teeth. There is little noticeable difference in water flow compared to 1.0 gpm aerators. In comparison to standard 2.2 gpm aerators, the .5 gpm aerator reduces the flow rate by 77%. All of these aerators are made in the USA, and most are WaterSense® certified!

Does your faucet comply with the legal flow rate requirements?

Under Federal Law – The Energy Policy Act of 1992, all kitchen and bathroom faucets are limited to a maximum flow of 2.2 gallons per minute (gpm) at a pressure of 60 psi.

Faucets installed in public lavatories must deliver a maximum flow of 0.5 gpm (ultra-low flow spray) or 0.25 gpc (gallons per cycle) for metering/electronic faucets.

1.0 GPM Faucet Aerators

Our 1.0 gpm aerators help to conserve water. Facility Manager’s, Energy Auditors and homeowners routinely use them to cut water and energy costs. Compared to 2.2 gpm aerators, 1.0 gpm aerators reduce the flow rate by 54%. Plus, all our aerators are made in the USA, and most are WaterSense® Certified!